ActionTec PC-250 Manuale Utente Scaricare il pdf (Pagina 2)

Introduction:

There are multiple ways to handle two router installs, and there is not one “right” way to do it. There is a

variety of networking options, situations and needs that cannot all be covered by one response. Below are

five ways Elan recommends that will handle

most

situations. Options 1, 2 & 3 involve removing one router

from the equation, either by physical removal (1&2) or turning one router into a bridge (3) by disabling its

router/firewall capabilities. Removing a router from the equation may not be easy or possible when confronted

with a DSL or Fiber Router/Modem. For those situations, see options 3, 4 & 5.

Overview of Options 1, 2 & 3: For the sake of simplicity, it is often easiest to remove one router

from the install and create a single unified network. This prevents a lot of hassle where multiple networks or

subnets can cause computers and other IP devices to not see each other.

1. REMOVE ONE ROUTER FROM THE INSTALL:

When deciding which router to leave in the install, we recommend leaving the Elan D-Link router in the install

as this is the router Elan supports and is familiar with. If you decide to leave the existing 3

-party router in the

install, bear in mind that Elan will not be able to support you on its functions, setup or troubleshooting.

Moreover, the Elan D-Link router will be preconfigured with most, if not all, of the settings you need to effect

the change. Below is a list of settings that you will need to double-check and/or alter to integrate an existing

network with the Elan sold D-Link. This option may be used in conjunction with option 2.

Wiring Diagram:

Wiring Configuration:

Remove all connections from the 1

router and remake connections on the 2

router/D-Link. Typically the

internet modem will be plugged into the WAN port, and network devices such as your computer, the Elan

Controller, or any switches will be connected to the LAN ports. Connect to a LAN port on the old router directly

with your computer if you need to reference settings as you reconfigure the 2

router.

www.elanhomesystems.com/dealer Tech Support: 800-622-3526

Page 2 of 11

1 2 3 4 5 6 7 ... 10 11

Nessun commento

ActionTec PC-250 Manuale Utente Pagina 2